Discover and select more than 150 software & hardware solutions certified by Dassault Systèmes to increase the power of your CATIA, DELMIA, ENOVIA, SIMULIA and 3DVIA configuration.

Home Extending Dassault Systèmes' Solutions thanks to approved partners

Friday, 10 October 2014

ICAM Technologies Corporation announces that it will launch *Integrated PSE V21, the latest version of its integrated Post-processing, Simulation & Emulation software, at IMTS 2014 (Booth: E-3217).

Inside a single software platform, Integrated PSE provides a unique environment for Post-processing, Simulation and Emulation (for G-Code) that interfaces with the most popular CAD/CAM/PLM systems, CNC controllers and machine tools on the market.

Integrated PSE V21 features SmartPATHTM, patent pending software created to optimize positioning tool paths during post-processing and simulation. SmartPATH provides savings both in CNC run-time positioning and in CAD/CAM tool path preparation.

Rapid positioning motions generated by CAD/CAM software do not take into account machine tool kinematics, work piece setup and travel limitations and therefore, place the burden of responsibility for safe and efficient positioning onto the NC programmer.

SmartPATH identifies inefficient and unsafe positioning motions and automatically replaces them with optimized collision-free safe motions based on the actual machine tool kinematics, physical travel limits, axes positioning rates and the dynamically changing state of the in-process stock.

Building on advanced forward-looking features such as path planning and rotary axes pre-positioning/winding, developed to enhance the machining process while avoiding dwell marks, over-traveling and rotary repositioning, Integrated PSE V21 offers an array of new features including:

  • SmartFEED: This optional module adjusts the cutting feed-rate (and if desired, the spindle speed as well), to ensure a constant safe material removal rate.
  • SmartCUT: This optional module automatically adjusts cutting motions, to eliminate unnecessary feed motions when the tool is not in contact with the material. These so called "air cuts" provide no value and can be difficult to resolve from the CAM system. SmartCUT also shortens rapid entry and extends feed exit motions to ensure cutting efficiency and safety.
  • Multi-Setup: This V21 feature supports Virtual Machine simulation of manufacturing processes that involve one or more changes of clamping and/or part location on the machine. Multi-setup also automatically tracks the in-process stock state as a part progresses from one manufacturing program to another.
  • Simulation Recording: This V21 feature automatically records the complete post-processing & simulation session for later review and analysis.


Friday, 10 October 2014 15:22:29 (Romance Daylight Time, UTC+02:00)  #    Disclaimer  |  Comments [0]  | 

Thursday, 12 April 2012

The COE 2012 Annual PLM Conference is THE event that the users of Dassault Systèmes' solutions won't miss for sure! From April 22, 2012 to April 25, 2012 at Rio All-Suite Hotel & Casino Las Vegas, NV Las Vegas, our users will receive the caliber of user-driven technical education, hands-on training opportunities and access to most accomplished professionals working with Dassault Systèmes products across industries and job roles.  

Have a look at the detailed program of sessions and also the list of exhibitors. Since it is a user-centric event, you'll have the chance to hear from several of our customers: Cessna Aircraft, Hydro-Québec, Johnson Controls, Purdue University, Bell Helicopter, and many others...  Of course, Dassault Systèmes' executives and experts will be there too. So, don't forget to register now!

The Technifair is the great place to meet some of the PLM MarketPlace partners, discover their solutions and ask questions to their experts: AMD, CD-adapco, CENIT, DPS, Elysium, ICAM, IGE+XAO and Theorem Solutions. Some of our resellers will be there too: Adaptive Corporation, Idex Solutions, Mecanica Solutions, RAND North America, and Tata Technologies.

Hope you'll enjoy the COE 2012 Conference. And this time, what happens in Vegas won't stay in Vegas: don't hesitate to share your feedback from the event!

The PLM MarketPlace team
Thursday, 12 April 2012 11:29:02 (Romance Daylight Time, UTC+02:00)  #    Disclaimer  |  Comments [0]  | 

Wednesday, 30 December 2009

Well, 2009 is really coming to its end, and after last week’s retrospective, and as promised, it is now time to look at the future! As we said, we’ve got really cool things to announce for the PLM MarketPlace community. In 2009 (also applies for the previous years ;-)), we spent time meeting our customers, partners, resellers online but also for real (COE, DEVCON, ECF, …) and tried to find out how we could do better to help them.

Of course, today, it is still too soon to disclose everything, but this, for sure, what you will get from the PLM MarketPlace in 2010.

A growing catalog

The software catalog will welcome two new post-processors providers: ICAM and IMS. Their offers should be available online mid-/end-January. Note that in the field of post-processors, CENIT referenced their offer a few weeks ago.
On the hardware catalog side, we are very proud to announce that AMD decided to join the PLM MarketPlace! Their offer is scheduled to be available next month, a special announcement will be made once it is online, stay tuned!
Finally, we remind our services providers that we are still looking for candidates to be referenced on the Services Catalog of the PLM MarketPlace. The referencing mode is very flexible and made to comply with your business habits. Don’t hesitate to contact us to know more!

You remember IBM?

In October, Dassault Systèmes announced the acquisition of IBM PLM and its 700 Sales Reps. These guys showed interest in the PLM MarketPlace and the easy way it represents to deliver more value to customers. This is why, in the coming weeks, IBM PLM Sales Reps will be able to resell the solutions available on PLM MarketPlace! This represents a good opportunity to make a connection between customers and referenced partners… Again, “connecting partners” is our motto!

Buy one, get…

… maybe not one free :-) but, for sure, in 2010, there will be special discounts from our referenced partners, even new ones! Check regularly the homepage (www.plmmarketplace.com) to discover the current discounts available and ask your VAR for more details!

2010 will be a year of new challenges and maybe, for some of us, of a new start. We want to remind you that we are here to help you find the best way to develop your activity, your business, meet your challenges,…

Consequently, whatever (well… almost :-))you need, feel free to contact us and ask, we’ll do our utmost to help you.

Customers, resellers, solutions providers, this program is yours and we are open to make it change the way you think it will help you. This is our challenge for 2010.

On behalf of Jacques and Alexandre, I wish you all the best for 2010!

Anthony Rosendo

AMD | catalog | cenit | IBM | ICAM | IMS | program
Wednesday, 30 December 2009 13:55:51 (Romance Standard Time, UTC+01:00)  #    Disclaimer  |  Comments [0]  | 

Subscribe to our blog posts

By RSSBy E-mail
 Rss Feed  E-mail subscription
Email service delivered by FeedBurner

Search

Navigation

About

© Copyright 2017, Copyright Dassault Systèmes

 
3ds.com

Beyond PLM (Product Lifecycle Management), Dassault Systèmes, the 3D Experience Company, provides business and people with virtual universes to imagine sustainable innovations. 3DSWYM, 3DVIA, CATIA, DELMIA, ENOVIA, EXALEAD, NETVIBES, SIMULIA and SOLIDWORKS are registered trademarks of Dassault Systèmes or its subsidiaries in the US and/or other countries.